P.63, Instrument panel indicators – HONDA 2013 Insight User Manual
Page 66
If it stays on after you have fully
released the parking brake while
the engine is running, or if it
comes on while driving, it can
indicate a problem in the brake
system. You will also see a
‘‘BRAKE FLUID LOW’’ or
‘‘CHECK BRAKE SYSTEM’’
message on the multi-information
display. For more information, see
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key. If it is not a properly
coded key, the indicator will blink,
and the engine’s fuel system will be
disabled (see
If this indicator comes on when the
engine is running, the 12 volt battery
is not being charged, and you will
also see a ‘‘CHECK CHARGING
SYSTEM’’ message on the multi-
information display. For more
information, see
.
This indicator has two functions:
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ‘‘RELEASE
PARKING BRAKE’’ message on
the multi-information display (see
).
1.
2.
Instrument Panel Indicators
Immobilizer System
Indicator
12 Volt Battery Charging
System Indicator
Parking Brake and
Brake System
Indicator (Red)
63
U.S.
Canada
12/07/13 16:45:03 31TM8630_068
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
TOC
2013 Insight