Automatic transmission fluid, Automatic transmission (cvt) fluid dipstick – HONDA 2013 Insight User Manual

Page 321

Advertising
background image

Remove the dipstick and check
the fluid level. There is a HOT
side and a COLD side on the
dipstick. The fluid level should be
between the upper and lower
marks on the HOT side.

Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.

Insert the dipstick all the way into
the transmission securely as
shown in the illustration.

Check the fluid level with the engine
at normal operating temperature.

Park the vehicle on level ground.
Start the engine, let it run until the
radiator fan comes on, then shut
off the engine. For accurate
results, wait about 60 seconds (but
no longer than 90 seconds) before
doing step 2.

3.

4.

2.

1.

Continuously Variable
Transmission (CVT)

Automatic Transmission Fluid

318

DIPSTICK

HOT
Range

UPPER
MARK

LOWER
MARK

12/07/13 17:17:17 31TM8630_323

Ma

int
e

na
nce

TOC

2013 Insight

Advertising