HONDA 2013 Insight - Manual (Page 315)

Changing the oil and filter requires
special tools and access from
underneath the vehicle. The vehicle
should be raised on a service
station- type hydraulic lift for
this service. Unless you have the
knowledge and proper equipment,
you should have this maintenance
done by a skilled mechanic.
Run the engine until it reaches
normal operating temperature,
then shut it off.
Open the hood, and remove the
engine oil fill cap.
Remove the screws with a Phillips-
head screwdriver, and clips with a
flat-tip screwdriver, then pull the
under-cover down.
Always change the oil and filter
according to the maintenance
messages shown on the multi-
information display. The oil and filter
collect contaminants that can
damage your engine if they are not
removed regularly.
1.
2.
3.
Changing the Oil and Filter
312
SCREW
CLIP
SCREWS
12/07/13 17:16:31 31TM8630_317
Ma
int
e
na
nce
TOC
2013 Insight