HONDA 2013 Insight - Manual (Page 325)

Remove the electrical connector
from the bulb by pushing on Remove the bulb from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Reinstall the cover over the back
of the headlight assembly and turn
it clockwise to lock it in place.
Push the electrical connector back
onto the cover.
Turn on the headlights to test the
new bulb.
4. 5.
6.
7.
8.
9.
Lights
322
BULB
COVER
CONNECTOR
12/07/13 17:17:46 31TM8630_327
Ma
int
e
na
nce
TOC
the tab and pulling the
connector down.
Install the upper part of the
windshield washer reservoir tank
in the reverse order of removal.
(Right side)
10.
2013 Insight