HONDA 2013 Insight - Manual (Page 324)

CONTINUED
Open the hood.
Your vehicle has halogen headlight
bulbs. When replacing a bulb,
handle it by its base, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area, readjustment may be
required. Adjustments should be
done by your dealer or another
qualified technician.
To change the bulb on the right
side, remove the upper part of the
windshield washer reservoir tank.
Use a flat-tip screwdriver to
remove the holding clip, then
remove the upper part by pulling it
straight up.
Remove the electrical connector
from the cover by pushing on the
tab to unlock it, then slide the
connector off the cover.
Remove the cover on the back of
the headlight assembly by turning
it counterclockwise.
1.
2.
3.
Headlight Aiming
Replacing a Headlight Bulb
Lights
High Beam Headlight
321
HOLDING CLIP
CONNECTOR
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
12/07/13 17:17:39 31TM8630_326
Ma
int
e
na
nce
TOC
2013 Insight