HONDA 2013 Insight - Manual (Page 94)

You can customize some vehicle
control settings. To enter the
customizing mode, press and hold
either INFO button (
/ ) for more
than 3 seconds. To change the
settings, the ignition switch must be
in the ON (II) position, and the
vehicle must be stopped with the
transmission in Park.
If you turn the ignition switch to the
ACCESSORY (I) or the LOCK (0)
position, or move the shift lever out
of Park, the display will change to
the normal screen.
If you try to enter the customizing
mode while the vehicle is moving,
you will see a ‘‘MUST STOP AND
SHIFT TO PARK TO CHANGE
SETTINGS’’ message and you
cannot change the settings.
If you want to change any vehicle
control settings, select CHG
SETTING, then press the SEL/
RESET button.
Refer to the table on the following
pages about the settings you want
to customize.
CONTINUED
Customized Settings
Multi-Information Display
91
12/07/13 16:48:58 31TM8630_096
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
TOC
2013 Insight