Lights – HONDA 2010 Ridgeline User Manual
Page 347
Advertising
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Push the socket into the light
assembly, and turn it clockwise
until it locks.
Remove the mounting screw from
the bed light assembly.
Pull out the light assembly.
Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Turn on the lights to make sure
the new bulb is working.
Reinstall the light assembly in the
bumper.
1.
2.
3.
4.
5.
5.
6.
CONTINUED
Replacing a Bed Light Bulb
Lights
Ma
int
e
na
nce
343
SCREW
SCREW
BULB
SOCKET
09/07/18 14:59:29 31SJC640_348
2010 Ridgeline
Advertising
This manual is related to the following products: