HONDA 2010 Ridgeline - Manual (Page 368)

Attach the stay to the extension,
then attach the wheel nut wrench
to the end of the extension. Turn the jack dial (wheel nut
wrench) clockwise as shown to
raise the vehicle until the flat tire
is off the ground.
Make sure the stay, the extension,
and the wheel nut wrench are
securely attached.
Insert the hook at the end of the
stay into the opening on the dial at
the bottom of the jack. 11. 12. 13.
Changing a Flat Tire
364
EXTENSION
CONNECTOR BUTTON
DIAL
CONNECTOR BUTTON WHEEL NUT WRENCH
HOOK
STAY
09/07/18 15:03:09 31SJC640_369
2010 Ridgeline