Wiper blades – HONDA 2010 Ridgeline User Manual
Page 350
                                    Advertising
                                    
                                        
                                    
                                
                                 
Raise the wiper arm off the
windshield.
To replace a wiper blade:
To raise the wiper arm, turn the
ignition switch to the ON (II)
position and activate the wipers
(see page
). When the wipers
are in the upright position, turn
the ignition switch off to stop the
wipers in that position.
Check the condition of the wiper
blades at least every six months.
Replace them if you find signs of
cracking in the rubber, areas that are
getting hard, or if they leave streaks
and unwiped areas when used.
1.
2.
Wiper Blades
346
WIPER ARMS
Do not open the hood when the wiper
arms are raised, or you will damage the
hood and the wiper arms.
09/07/18 14:59:55 31SJC640_351
2010 Ridgeline
                                    Advertising
                    
                        
                    
                            
                            
                    This manual is related to the following products: