Installing a child seat – HONDA 2010 Ridgeline User Manual
Page 54
Advertising
Attach the tether strap hook to the
center tether anchor between the
lower anchors for the LATCH-
compatible child seat.
Properly secure the child seat (see
page
), then tighten the tether
strap according to the seat maker’s
instructions.
Whenever using the tether strap,
make sure to route the strap through
the upper guide before attaching the
tether strap hook to the tether
anchor. If the tether strap is not
routed properly and secured, the
child seat may not be secured. This
could lead to serious injury or death.
5.
6.
Installing a Child Seat
50
UPPER GUIDE
CENTER TETHER ANCHOR
09/07/18 14:05:56 31SJC640_055
2010 Ridgeline
Advertising
This manual is related to the following products: