Changing a flat tire, 2010 ridgeline – HONDA 2010 Ridgeline User Manual
Page 367
Advertising
CONTINUED
Loosen each wheel nut 1/2 turn
with the wheel nut wrench.
Place the jack under the jacking
point nearest the tire you need to
change.
Turn the dial at the bottom of the
jack clockwise until the top of the
jack contacts the jacking point.
Make sure the jacking point tab is
resting in the jack notch.
8.
9.
10.
Changing a Flat Tire
T
a
k
ing
Ca
re
of
th
e
U
ne
x
p
e
c
te
d
363
JACKING POINT
DIAL
09/07/18 15:03:01 31SJC640_368
2010 Ridgeline
Advertising
This manual is related to the following products: