HONDA 2011 CR-Z - Manual (Page 108)

107
Controls
Opening and Closing the Windows
Opening/Closing the Power Windows
Opening/Closing the Power Windows
The auto-reverse function stops sensing when
the window is almost closed to ensure that it fully
closes.
The power windows can be operated for up to 10
minutes after you turn the ignition switch off.
Opening either door cancels this function.
Auto Reverse
If a power window senses resistance when closing
automatically, it will stop closing, and reverse
direction.
The driver’s window auto reverse function is
disabled when you continuously pull up the switch.
WARNING
Closing a power window on someone’s
hands or fingers can cause serious
injury.
Make sure your passenger is away from
the window before closing it.
The power windows can be opened and closed when the ignition switch is in ON
II , using the switches on the doors. The driver side switch can be used to open and
close both windows.
The main switch on the driver side must be switched off (not pushed in) to open
and close the passenger’s window from the passenger side.
When the main switch is turned on (pushed in), you can only operate the
passenger’s window from the driver’s seat. Turn the main switch on if a child rides
in the passenger’s seat.
Opening/Closing the Driver’s Window ■
■ Automatic Operation
To open: Push the switch down firmly.
To close: Pull the switch up firmly.
The window opens or closes completely. To
stop the window at any time, push or pull the
switch briefly.
Manual Operation ■
To open: Push the switch down lightly.
To close: Pull the switch up lightly.
Release the switch when the window reaches
the desired position.
On
Main Switch
Passenger’s
Window
Switch
Driver’s
Window
Switch
Off
31SZT600book.indb 107 2010/04/28 13:41:43
2011 CR-Z