HONDA 2011 CR-Z - Manual (Page 69)

68
Instrument Panel
Indicators
Indicator Name On/Blinking Explanation Message
U.S.
Canada
Parking
Brake and
Brake System
Indicator
Comes on briefly when you turn •
the ignition switch to ON II , then
goes off (comes on when the
parking brake is applied).
Comes on when the brake fluid
•
level is low.
Comes on if there is a problem
•
with the brake system.
The beeper sounds and the
•
indicator comes on if you drive
with the parking brake not fully
released.
Comes on while driving • - Make sure
the parking brake is released. Check
the brake fluid level.
What to Do When It Comes On
While Driving P.302
Comes on along with the ABS •
indicator - Have the vehicle checked
by a dealer.
If the Brake System Indicator Comes
On P.302
U.S. Canada
Low Oil Pressure
Indicator
Comes on when you turn the •
ignition switch to ON II , and goes
off when the engine starts.
Comes on when the engine oil
•
pressure is low.
Comes on during driving • -
Immediately stop in a safe place.
If the Low Oil Pressure Indicator
Comes On P.299
31SZT600book.indb 68 2010/04/28 13:40:51
2011 CR-Z