HONDA 2011 CR-Z - Manual (Page 261)

260
Maintenance
Replacing Light Bulbs Fog Light Bulbs
Fog Light Bulbs*
When replacing, use the following bulbs.
Fog Lights: 55W (H11)
1. Turn the steering wheel all the way to the
opposite side from the fog light being
replaced.
Passenger side: Turn the steering wheel
to the left.
Driver side: Turn the steering wheel to
the right.
Remove the clip and screws, and pull the
2.
inner fender back.
Fog Light Bulbs
NOTICE
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin
or hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
When removing the clip, insert a flat-tip
screwdriver, and lift and remove the central pin.
Clip
Inner Fender
Screw
* Not available on all models
31SZT600book.indb 260 2010/04/28 13:44:00
2011 CR-Z