HONDA 2011 CR-Z - Manual (Page 112)

111
Controls
Operating the Switches Around the Steering Wheel Light Switches
Automatic Operation (automatic lighting control) ■
*
Automatic lighting control can be used when
the ignition switch is in ON
II .
When you turn the light switch to AUTO , the
headlights and other exterior lights will switch
on and off automatically depending on the
ambient brightness.
Automatic Operation (automatic lighting control)
We recommend that you turn on the lights
manually when driving at night, in a dense fog,
or in dark areas such as long tunnels or parking
facilities.
The light sensor is in the location shown below.
Do not cover this light sensor with anything;
otherwise, the automatic lighting system may not
work properly.
You can change the AUTO light sensitivity using
the multi-information display.
Customization Procedure P.90
Light Sensor
* Not available on all models
31SZT600book.indb 111 2010/04/28 13:41:48
2011 CR-Z