HONDA 2011 CR-Z - Manual (Page 274)

273
Maintenance
Checking and Maintaining Tires DOT Tire Quality Grading (U.S. Vehicles)
Traction ■
The traction grades, from highest to lowest, are AA, A, B, and C. Those
grades represent the tire’s ability to stop on wet pavement as measured
under controlled conditions on specified government test surfaces of
asphalt and concrete. A tire marked C may have poor traction performance.
Temperature ■
The temperature grades are A (the highest), B, and C, representing the
tire’s resistance to the generation of heat and its ability to dissipate heat
when tested under controlled conditions on a specified indoor laboratory
test wheel. Sustained high temperature can cause the material of the tire
to degenerate and reduce tire life, and excessive temperature can lead to
sudden tire failure. The grade C corresponds to a level of performance
which all passenger car tires must meet under the Federal Motor Vehicle
Safety Standard No. 109. Grades B and A represent higher levels of
performance on the laboratory test wheel than the minimum required by
law.
Traction
Warning: The traction grade assigned
to this tire is based on straight-ahead
braking traction tests, and does
not include acceleration, cornering,
hydroplaning, or peak traction
characteristics.
Temperature
Warning: The temperature grade for
this tire is established for a tire that is
properly inflated and not overloaded.
Excessive speed, underinflation, or
excessive loading, either separately or in
combination, can cause heat buildup and
possible tire failure.
31SZT600book.indb 273 2010/04/28 13:44:12
2011 CR-Z