Changing the rear wiper blade rubber, 2011 cr-z – HONDA 2011 CR-Z User Manual
Page 269
Advertising
268
Maintenance
Checking and Maintaining Wiper Blades Changing the Rear Wiper Blade Rubber
Changing the Rear Wiper Blade Rubber
1. Raise the wiper arm off.
Slide the wiper blade out from the wiper
2.
arm while pushing the lock tab.
3. Slide the wiper blade out from its holder
by pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
Slide the wiper blade onto the holder.
5.
Make sure it is engaged correctly, then
install the wiper blade assembly onto
the wiper arm.
Changing the Rear Wiper Blade Rubber
NOTICE
When replacing the wiper blade, make sure not to
drop the wiper blade or wiper arm down on the
rear window.
Tabbed End
31SZT600book.indb 268
2010/04/28 13:44:09
2011 CR-Z
Advertising