Pc 5153, Chapter 3 unpacking – Acnodes PC 5153 User Manual
Page 25
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at .
PC 5153
15” Industrial wireless Panel PC
CHAPTER 3 UNPACKING
3.1 ANTI-STATIC PRECAUTIONS
WARNING!
Failure to take ESD precautions during the installation of the PC5153/ PC5173
may result in permanent damage to the PC5153/ PC5173 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic compo-
nents, including the PC5153/ PC5173. Dry climates are especially susceptible to ESD.
It is critical that the following anti-static precautions are strictly adhered to whenever
handling the PC5153/ PC5173 or any other electrical component.
ƒ
Wear an anti-static wristband - Wearing a simple anti-static wristband can help to
prevent ESD from damaging the PC5153/ PC5173.
ƒ
Self-grounding - Touch a grounded conducting material before handling and peri
odically while handling the PC5153/ PC5173.
ƒ
Use an anti-static pad - When configuring the PC5153/ PC5173, place it on an
antic-static pad to reduce the possibility of ESD damage.
ƒ
Only handle the edges of the PC5153/ PC5173 - When handling the PC5153/
PC5173, hold it by its edges.
3.2 UNPACKING PRECAUTIONS
When the PC5153/ PC5173 is unpacked, please do the following:
ƒ
Follow the anti-static precautions outlined in Section 3.1.
ƒ
Make sure the packing box is facing upwards so the PC5153/ PC5173 does not
fall out of the box.
ƒ
Make sure all the components shown in Section 3.3 are present.
3.3 PACKAGE CONTENTS
1 x PC5153/ PC5173
1 x SATA CD-ROM cable
1 x Panel Mount Kit
1 x Wall Mount Kit
1 x Power cord
1 x Screw set