Acnodes PC 5153 - Manual (Page 26)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5153
15” Industrial wireless Panel PC
CHAPTER 4
INSTALLATION AND CONFIGURATION
4.1 INSTALLATION PRECAUTIONS
When installing the PC5153/ PC5173, please follow the precautions listed below:
ƒ Turn power off: When installing the PC5153/ PC5173 make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or damage
to the system.
ƒ Certified Engineers: Only certified engineers should install and modify on-board
functions.
ƒ Mounting: The PC5153/ PC5173 is a heavy device. When mounting the system
onto a rack, panel, wall or arm please make sure that at least two people are as
sisting with the procedure.
ƒ Anti-static Discharge: If a user open the rear panel of the PC5153/ PC5173, to
configure the jumpers or plug in added peripheral devices, ground themselves
first and wear and anti-static wristband.
4.2 PREINSTALLED COMPONENTS
The following components are all preinstalled.
ƒ Motherboard
ƒ TFT LCD
ƒ Touch screen
ƒ Power switch
ƒ Power supply
ƒ Inverter board
ƒ DIMM
ƒ System cooling fans
Preinstalled OEM customizations may include the following.
ƒ CPU
ƒ HDD
ƒ CD drive
ƒ PCI/PCIe x4 riser card