Acnodes PC 5153 - Manual (Page 30)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5153
15” Industrial wireless Panel PC
4.5.4 COM1 TO COM5 PIN 9 SELECT
Jumper Label: J_COM_V1, J_COM_V2, J_COM_V3, J_COM_V4 and
J_COM_V5
Jumper Type: 6-pin header
Jumper Settings:See Table 4-4
Jumper Location: See Figure 4-3
Four jumpers configure pin 9 on the COM1, COM2, COM3 COM4 and COM5 connec-
tors. Pin 9 on these connectors can be set as either +5 V, +12 V or as the ring (RI)
signal. The COM1, COM2, COM3, COM4 and COM5 Pin 9 Setting jumper selection
options are shown in Table 4-4.