Acnodes PC 5153 - Manual (Page 56)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5153
15” Industrial wireless Panel PC
ATA/IDE Configurations [Compatible]
Use the ATA/IDE Configurations option to configure the ATA/IDE controller.
Disabled Disables the on-board ATA/IDE controller.
Compatible Configures the on-board ATA/IDE controller to be in compatible mode. In this
mode, a SATA channel will replace one of the IDE channels. This mode sup
ports up to 4 storage devices.
Enhanced (DEFAULT) Configures the on-board ATA/IDE controller to be in Enhanced mode.
In this mode, IDE channels and SATA channels are separated. This
mode supports up to 6 storage devices. Some legacy OS do not
support this mode.
Configure SATA as [IDE]
Use the Configure SATA as option to configure SATA devices as normal IDE devices.
IDE DEFAULT Configures SATA devices as normal IDE device.
RAID Configures SATA devices as normal RAID device.
AHCI Configures SATA devices as normal AHCI device.
Configure SATA Channels [Before PATA]
Use the Configure SATA Channels option to determine how SATA channels and PATA channels are
ordered.
Before PATA DEFAULT Puts SATA channels before PATA channels.
Behind PATA Puts SATA channels behind PATA channels.