Acnodes PC 5153 - Manual (Page 84)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 5153
15” Industrial wireless Panel PC
6.6 PSU MODULE REPLACEMENT
Please read the warnings at the beginning of Section 4.3 before attempting to access any
PC5153/ PC5173 internal components.
If the PSU module has been damaged it must be replaced. To replace the PSU module, please
follow the steps below.
6.6.1 Remove the Old PSU
Step 1: Remove the back cover (Section 4.4).
Step 2: Detach and remove the elevated platform (Section 6.5).
Step 3: Disconnect all PSU connections including those to the motherboard (Figure 6-6) and any
disk drives.
Step 4: Unfasten the screws on the inside panel (Figure 6-7).