Acroprint timeQplus Biometric (V2) TQ100 Terminal - Manual (Page 23)

7.1 Data Management
Press the Scroll-down button to browse the menu structure.
Select Data Management and press OK to enter the level-2 menu interface
as follows:
Data Management
User
Admin
Sensitivity Data Management
Delete
ViewPunch
ViewAdmin
Data Management
View Management Record
Delete All Rec
There are a total of seven level-2 menus in Data Management, namely
User registration, Administrator registration, Sensitivity level setting, Delete
registration data, View punches, View admin record, and Delete all records.
7.1.1 Select User registration menu and then press OK to enter the
level-3 menu as follows:
Select fingerprint registration and then press OK; refer to Chapter Five
for fingerprint enrollment.
Select password registration and press OK to display the following:
User
Finger
Password
FP+PW
Password
ID 00002
ESC Set-OK
Chapter Seven: Administrator Functions
Attention:
If there are no administrators enrolled, administrator settings can be accessed and
modified by any user. The administrators must be enrolled and validated. Before any
set up changes are performed, the administrator must be enrolled
and validated. Then the administrator can perform administrative as well as time and
attendance functions. The users without administrative rights can only use the time
and attendance function.
At the terminal, administrators can perform setup changes, enroll and delete
users, and visualize records, but the punches can only be edited at the PC
using AttendanceRx software.
Press MENU to display the menu structure; if no administrator is enrolled the
following will be displayed:
Administrators can be enrolled following the steps detailed in 7.1.2.
When one or more administrators are enrolled on the terminal, the following
message is displayed:
When administrator validation fails (incorrect fingerprint or password), the message
“Invalid” or “Not Found” is displayed. The administrator validation process should be
restarted. If successful, the administrator is able to access
the menu interface.
To log in as Administrator:
1. For administrators enrolled with fingerprint, press MENU first and then
press the finger you want to validate on the sensor window. Upon successful
validation, the menu interface is displayed.
2. For administrators enrolled with passwords, press MENU first, then key in
the User ID Number, press OK, and then key in the password followed by OK.
If validated, the menu interface will be displayed.
If the terminal can not be accessed because the Admin information is missing
(like unknown fingerprint or password), please take the following steps to unlock
the terminal: power off the terminal, keep the “Esc” key pressed, power on the
terminal, read the baud rate and terminal ID info from the screen that is displayed.
To revert to normal operation press any other key on the keypad. Then you need
to connect the terminal to the software running on your PC via RS232 connection,
add the terminal and remove all data to clear the Admin information.
11:45 AM
04/28/06 FRI
timeQplus BIOMETRIC™ Terminal User Manual 23 22 timeQplus BIOMETRIC™ Terminal User Manual
Menu
Data Management
Setup
System Information
Administrator?