Acroprint timeQplus Biometric (V2) TQ100 Terminal - Manual (Page 29)

timeQplus BIOMETRIC™ Terminal User Manual 29 16 timeQplus BIOMETRIC™ Terminal User Manual
5.2 Fingerprint Registration
There are two registration modes available for the terminal: fingerprint and
password.
A unique ID number per user is required for enrollment. For each ID number
you can enroll up to 10 fingerprints and 1 password. When the terminal is
powered up, the interface looks similar to below:
With the terminal powered on, please follow the detailed instructions below to
enroll an employee’s fingerprint:
Select the Menu option; once that is displayed you will see the following image,
and then select Data Management.
Press OK to display the following:
Welcome
9:00 AM
04/28/06 FRI
Menu
Data Management
Setup
System Info
Data Management
User
Admin
Sensitivity
7.1.8 Display Messaging
1. When viewing punches, the initials displayed on the interface have
the following meanings:
V_F: The registration type is fingerprint
V_P: The registration type is password
2. When viewing admin records, the initials on the interface have the
following meanings:
E_U: General User Registration
E_M: Administrator Registration
E_DF: Delete Fingerprint Registration Record
E_DP: Delete Password Registration Record
D_L: Delete All Record Data
S_T: Time Setting
S_S: System Setting
S_L: Record Setting
S_C: Communication Setting
7.2 Setup
Press MENU to enter and select Setup menu. Then press OK to access
the level-2 menu with the following display:
The Setup menu consists of System Setting, Record Setting, Communication
Setting and Display Adjustment Setting.
7.2.1 System Setting
In System Setting, press OK to display the following:
Setup
System
Record
Communication Setup
Record Setting
Communication
Display Adjust
System
Admin Max 5
Language
ENG
Time
System
Voice Out
Yes
Unlock Yes
Auto Off No