Acroprint timeQplus Biometric (V2) TQ100 Terminal - Manual (Page 28)

timeQplus BIOMETRIC™ Terminal User Manual 17 28 timeQplus BIOMETRIC™ Terminal User Manual
Press OK to display the following:
Press OK to display the following:
Press OK to display the following:
In the process of enrolling employee’s passwords, when the user ID is
introduced, the zero digits located at the beginning of the number
sequence are not required to key in. Example: If the user ID number is
“0050”, the user needs to key in only “50”.
Accept the user ID displayed or key in a user ID and press OK to display
the following:
Finger
New Enroll?
No-ESC Yes-OK
New Enroll
ID 00001
ESC Set-OK
Note: ID range can
be any combination
of numbers from
00001 - 65535
New Enroll
Place Finger #1
7.1.6 Select View Admin Records menu and press OK to access the
level-3 menu as follows:
After entering the administrator user ID number, press OK to display
the following:
Note: T-00001: Total number of admin events is 1
L-00001: The last recorded admin event
05/05/20 20:45: Admin/setup time
E_M: indicates type of admin operation
performed (see 7.1.8 below)
The interface displays the total occurrences when the administrator has
managed/setup the machine, the detailed time of each occurrence,
and type of operation performed.
ViewAdmin T-00001
L-00001
05/05/20 02:45 E_M
ESC Confirm -OK
7.1.7 Select Delete All Records menu and press OK to access the
level-3 menu as follows:
Press OK to delete all records, press ESC to cancel and exit.
Delete All Rec
Delete?
No-ESC Yes-OK
Note: When the
command “Delete all
records” is confirmed,
all the records stored
on the terminal will
be deleted.
ViewAdmin
ID 00000
ESC Confirm -OK
User
Finger
Password
FP+PW
Figure A