Actron AutoScanner® Plus CP9580A - Manual (Page 41)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 17
Using The Scan Tool
3
Program Mode
The Program Mode is used for
updating the Scan Tool. Instructions
are provided with upgrades. Refer
to “Download Scanning Suite” in
Section 2.
✓
If the Program Mode is entered, the BACK (symbol) is not
operational. The tool must be powered off to exit Program Mode
and then restarted to continue.
=====================
Long PID Names
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
System Setup
Program Mode