Actron AutoScanner® Plus CP9580A - Manual (Page 45)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 21
Using The Scan Tool
3
1. Select
Print Data.
•Use UP or
DOWN
arrow key until Print Data is
highlighted.
•Press
ENTER
.
✓
On the Print Data menu, Print All prints all data collected by the Scan
Tool.
✓
When printing a Recording, Start Frame and End Frame must be
defined.
2.Select Data To Be Printed.
•Use UP or
DOWN
arrow key.
•Press
ENTER
.
✓
The Print Data menu shows a
check mark next to the items that
have data.
✓
If there is no checkmark next to the item, then this item cannot be
selected until the appropriate function is run from the Diagnostic
Menu
.
3.Return to
Select Print Data screen.
•Press
BACK .
=====================
Component Locator
Acronyms
Review Data
Main Menu
Code Lookup
System Setup
Print Data
=====================
Print All
I/M Monitors
DTCs (Codes)
State OBD Check
Recording
View Fre eze Data
Print Data
Print All