Actron AutoScanner® Plus CP9580A - Manual (Page 49)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 25
Using The Scan Tool
3
•Press
ENTER
.
A Turn Key Off screen will display.
After 10 seconds, turn key
On. If the
vehicle is supported, the VIN number
and essential vehicle data will display.
Use the
LEFT
or RIGHT arrow
key to select YES or NO.
•If YES is selected, the Tool
may display more selections to
further select the vehicle
because not every aspect of
vehicle identification is
contained in the VIN.
•If NO is selected, the Tool
proceeds to manual selection.
•Press
ENTER
.
3.If Manual was selected in Step 2,
•Use UP or
DOWN
arrow key to highlight:
❒ Global OBD II
❒ Domestic Vehicles
❒ European Vehicles
❒ Asian Vehicles
❒ Previous Vehicle
•Press
ENTER
.
✓
The Global OBD II selection is provided for vehicles that are not listed.
It is a good idea to always select your specific vehicle when listed to
get the most benefit from your tool.
✓
If you have previously selected a vehicle it will appear as a menu
selection after Asian vehicles. On the screen shown, the 2003
Corvette is the previous vehicle.
✓
If you select the previous vehicle, the tool will proceed to the
Diagnostic menu.
✓
If you wish to select a vehicle other than the previous vehicle, then
choose between Global OBD II, Domestic Vehicles, European
Vehicles, or Asian Vehicles and continue making selections until the
vehicle selection is complete.
to continue.
=====================
Please turn the key
off for 10 seconds
then turn the key on.
Press ENTER
Turn Key Off
=====================
2004 Chevrolet
Espress 1500
5.3
Is this correct?
VIN 1GCFG15T541238036
YES NO
=====================
OBD II/EOBD
US
Europe
Asia
Prev: 03 Corvette
Vehicle?
US