Actron AutoScanner® Plus CP9580A - Manual (Page 95)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 39
Diagnostic Menu
4
Modules Present
The Scan Tool identifies the module IDs and communication type
for all Global OBD II modules in the vehicle.
From the Diagnostic Menu:
1.
=====================
Drive Cycle Monitor
O2 Monitor Tests
Diag Monitor Tests
On-Board Systems
Vehicle Information
Modules Present
Diagnostic Menu
Modules Present
Select Modules Present.
•Use
UP or DOWN
arrow key until Modules
Present is highlighted.
•Press ENTER.
✓
The types of protocols (communication types) supported by the Scan
Tool are:
❒ ISO 9141-2 protocol is shown as ISO.
=====================
ID Protocols
$10 ISO*
$1A ISO*
Modules Present