Garmin GPS 400 - Manual (Page 163)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H 8-27
SECTION 8
AUX PAGES
Setting the local time:
1) Select ‘Date/Time’ from the Setup 1 Page, using
the steps described at the beginning of this
section.
2) Turn the large right knob to highlight the time
offset field (Figure 8-68).
Figure 8-68 Time Offset Field Highlighted
3) Use the small and large right knobs to enter
the desired offset, beginning by entering a
minus (-) or plus (+) sign to indicate whether
the offset is behind UTC or ahead of UTC. In
the United States, all local time offsets use
minus, or behind UTC.
4) Press the ENT Key to accept the selected
offset.
Restoring Factory Settings
When making changes to any Setup 1 Page option, a
‘Restore Defaults?’ menu selection allows the pilot to restore
the original factory settings (for the selected option only).
For example, with the Airspace Alarms Page displayed,
the ‘Restore Defaults?’ option restores all Airspace Alarms
Page settings to the original factory values.
Restoring a Setup 1 option to the original
factory settings:
1) Select the desired menu option from the
Setup 1 Page, using the steps described at the
beginning of this section.
2) Press the MENU Key to display the Date/Time
Page Menu (Figure 8-69).
Figure 8-69 Date/Time Page Menu
3) With ‘Restore Defaults?’ highlighted, press the
ENT Key.