Garmin GPS 400 - Manual (Page 38)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H
SECTION 2
NAV PAGES
2-12
Automatic Zoom
The automatic zoom feature automatically adjusts
the map range from 2000 nm through each lower range,
stopping at 1.0 nm when approaching the destination
waypoint.
Enabling/disabling automatic zoom:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Setup Map?’ and press the
ENT Key.
2) Turn the small right knob to select ‘Map’ and
press the ENT Key.
3) Turn the large right knob to highlight the ‘Auto
Zoom’ field.
4) Turn the small right knob to select ‘On’ or
‘Off’.
5) Press the ENT Key to accept the selected
option.
To enable/disable the wind vector, all
background land data, or all Jeppesen
aviation data:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Setup Map?’ and press the
ENT Key.
2) Turn the small right knob to select ‘Map’ and
press the ENT Key.
3) Turn the large right knob to highlight the
appropriate field.
4) Turn the small right knob to select ‘On’ or
‘Off’.
5) Press the ENT Key to accept the selected
option.
Displaying airports, NAVAIDs, active flight
plan waypoints, user-created waypoints,
state/provincial boundaries, rivers/lakes,
and cities:
1) From the Map Page Menu, turn the large right
knob to highlight ‘Setup Map?’ and press the
ENT Key.
2) Turn the small right knob to select the
appropriate ‘Group’ name (per Table 2-2) and
press the ENT Key.
3) Turn the large right knob to highlight the zoom
field for the desired feature.
4) Turn the small right knob to select the
maximum range at which the feature should
appear on screen (or select ‘Off’ to never
display the selected feature).
5) Press the ENT Key to accept the selected
option.
6) Turn the large right knob to highlight the text
field for the desired feature.
7) Turn the small right knob to select the desired
text size, or select ‘None’ to disable text
descriptions.
8) Press the ENT Key to accept the selected
option.