Garmin GPS 400 User Manual

Page 78

Advertising
background image

GPS 400 Pilot’s Guide and Reference

190-00140-60 Rev. H

SECTION 5

PROCEDURES

5-2

5) Turn the large right knob to highlight ‘Load?’

or ‘Activate?’ (approaches only) and press the
ENT Key. ‘Load?’ adds the procedure to the
flight plan without immediately using it for
navigation guidance. This allows the pilot to
continue navigating the original flight plan, but
keeps the procedure available on the Active
Flight Plan Page for quick activation when
needed.

6) For precision approaches and some non-

precision approaches, a reminder window
appears indicating that GPS guidance on
such approaches is strictly for monitoring only.
Use an external VOR/ILS receiver and CDI (or
HSI) for primary navigation. To confirm this
reminder, highlight ‘Yes?’ and press the ENT
Key.

Not all approaches in the database are approved for

GPS use. When selecting an approach, a ‘GPS’ designation
to the right of the procedure name (Figure 5-4) indicates
the procedure can be flown using the GPS receiver. Some
procedures do not have this designation, meaning the
GPS receiver may be used for supplemental navigation
guidance only. ILS approaches, for example, must be
flown by tuning an external VLOC receiver to the proper
frequency and coupling the VLOC receiver to the external
CDI (or HSI).

Figure 5-4 ‘GPS’ Designations

Once an approach is selected, it may be activated

for navigation from the Procedures Page. Activating
the approach overrides the enroute portion of the active
flight plan, proceeding directly to the approach portion
(for a full approach, directly to the initial approach fix).
Activating the approach also initiates automatic CDI
scaling transition as the approach progresses.

Activating an approach:

1) Press the PROC Key to display the Procedures

Page (Figure 5-5).

2) Turn the large right knob to highlight ‘Activate

Approach?’ (Figure 5-5) and press the ENT
Key.

Figure 5-5 Procedures Page

3) A confirmation widow will appear (Figure 5-6).

With ‘Yes?’ highlighted, press the ENT Key.

Figure 5-6 Confirmation Window

Advertising