Garmin GPS 400 - Manual (Page 35)

GPS 400 Pilot’s Guide and Reference 190-00140-60 Rev. H
SECTION 2
NAV PAGES
2-9
Airspace Information on the Map
When a special-use or controlled airspace boundary
appears on the Map Display, the pilot can quickly retrieve
information (such as floor/ceiling limits and controlling
agency) directly from the map.
Viewing airspace information for an on-
screen special-use or controlled airspace:
1) Use the panning function (‘Map Panning’ in this
section) to place the target pointer on an open
area within the boundaries of an airspace. If
the area is congested and it is difficult to select
an open area, the pilot may need to zoom in or
press the CLR Key to make the selection easier
(Figure 2-14).
Figure 2-14 Select Airspace with Target Pointer
2) Press the ENT Key to display an options menu
(Figure 2-15).
Figure 2-15 Map Panning Options Window
3) ‘Review Airspace?’ should already be
highlighted. If not, select it with the small
right knob. Press the ENT Key to display the
Airspace Information Page for the selected
airspace.
4) To display the COM frequency(ies) for the
controlling agency, turn the large right knob to
highlight ‘Frequencies?’ and press the ENT Key.
Press the CLR Key to return to the Airspace
Information Page.
5) Press the CLR Key to exit the Airspace
Information Page.