Garmin GPS II - Manual (Page 33)

27
Available user-selectable options on the position page are:
Trip Odometer (TRIP)— shows the total distance traveled since last reset.
Trip Timer (TTIME)— total (cumulative) time in which a ground speed has
been maintained since last reset.
Elapsed Time (ELPSD)— shows the overall hours and minutes since last reset.
Average Speed (AVSPD)— calculates the average speed traveled.
Maximum Speed (MXSPD)— shows the maximum speed traveled since last
reset.
Altitude (ALT)— measurement of a vertical distance above sea level.
To reset a timer, speed measurement, or odometer:
1. Highlight the user-selectable field, and press ENTER.
2. Press ENTER to confirm the ‘RESET?’ prompt, or QUIT to exit.
The trip odometer, trip timer, and average speed fields are linked, so resetting
one of these options in one user-selectable field will automatically reset the corre-
sponding data in the other. That way, the information provided in these fields is rela-
tive to your current trip.
REFERENCE
The position format and units
of measure for speed, distance,
position, and altitude are all
u s e r-selectable through the
navigation setup page (see
pages 74). The 12/24 hour
clock and time offset options
are available from the system
setup page (see page 72).
GPS II 7/23/98 4:04 PM Page 27