Reference – Garmin GPS II User Manual
Page 36
Advertising
30
Marking a Position
When marking a position, you may also choose to change the default name or
add the waypoint to a route.
To change the default position name:
1. Highlight the ‘name’ field, and press ENTER.
2. Enter a value in the appropriate ‘character’ field (Fig. 30a), highlight ‘SAVE?’, and press
ENTER.
If you’d like to add this waypoint to a route:
1. Highlight the ‘add to route number’ field, press ENTER, and enter a route number (Fig. 30b).
2. Press ENTER to confirm the route number, and ENTER again to save the waypoint.
To save the marked waypoint:
1. Highlight ‘SAVE?’, and press ENTER.
Fig. 30b
Fig 30a
REFERENCE
GPS II 7/23/98 4:04 PM Page 30
Advertising