Reference – Garmin GPS II User Manual
Page 59
On-Route GOTOs
At the beginning of this section, we mentioned that the GPS II will automatically
select the route leg closest to your position as the active leg. This will give you steer-
ing guidance to the desired track of the active leg. Note that the first waypoint select-
ed as the destination waypoint will be of the route leg closest to your present posi-
tion This may mean you’re not navigating to the first waypoint in the active route—
you may be navigating to the last. If you prefer to navigate a route out of sequence,
you can perform an ‘on-route GOTO’ from the active route page.
1. Highlight the desired route waypoint, and press GOTO.
2. Once the GOTO waypoint page appears with the waypoint highlighted (Fig. 53a), press
ENTER.
Note that after you reach the on-route GOTO waypoint, the GPS II will automat-
ically resume navigating the rest of the route in sequence (Fig. 53b).
Fig. 53a
Fig. 53b
REFERENCE
53
GPS II 7/23/98 4:04 PM Page 53