Garmin GPS II - Manual (Page 53)

Route Definition Page (cont.)
The right side of the route definition page features several ‘function’ fields which
let you copy, clear, invert, or activate the displayed route. Routes 1-19 are used as
storage routes, with route 0 always serving as the active route you are navigating. If
you want to save a route that’s currently in route 0, be sure to copy it to another
open route, as it will be overwritten by the next route activation.
Routes can be copied, cleared, inverted, and activated (Fig. 47a) through the
route definition page.
To select the route definition page:
1. Highlight ‘ROUTES’ from the menu page, and press ENTER.
The ‘route number’ field is displayed at the top of the page (Fig. 47b), with a 16-
character ‘user comment’ field to the right. If no user comment is entered, the field
will display the first and last waypoint in the route. The waypoint list on the left side
of the page accepts up to 30 waypoints for each route, with fields for desired track
and distance between legs. The total distance of the route is indicated below the
waypoint list.
Fig. 47a
Fig. 47b
REFERENCE
47
GPS II 7/23/98 4:04 PM Page 47