Manually selecting a flight plan leg 9-19, Manual leg select 9-19, Manually selecting a flight plan leg -19 – Garmin APOLLO GX65 User Manual
Page 209
suspends leg-sequencing at that waypoint and lights
the OBS/HLD annunciator.
Subsequent pressing of
DIRECT-TO
toggles between
the waypoint selection and OBS DTK choices.
Manually
Selecting a
Flight plan
Leg
Approach operations often result in the need to
manually select a leg of the active flight plan. Manual
leg selection will often be required when operating
with Radar vectors and there is the need to intercept
an approach course. It may also occur when flying a
DME-ARC to intercept an approach course. You
cannot manually select a DME-ARC as a flight plan
leg.
1. Press
FPL
to reach the active leg of your flight plan.
Then, turn the
SMALL
knob to display the desired
leg.
LGD
to
BKE
2** 146° 28.2nm
arpt
iaf
2. Press
ENTER
.
LGD
to
BKE
Press ENTER
to Activate leg
3. Press
ENTER
to accept the displayed destination
waypoint. The unit will then go to NAV mode.
9-19
Approach Basics (GX50/60)
FPL
ENTER
ENTER