Garmin APOLLO GX65 - Manual (Page 96)

Set the SAR Position (Basic Grid Type)
1. If you selected the Basic Grid Type, you need to set
the SAR Position. From the SAR Map Setup page
turn the
SMALL knob clockwise to the SAR
Position page. The SAR Position page only appears
when the Basic Grid Type is selected. The Position
location refers to the LAT/LON of the southeast
starting corner for the selected grid.
SAR Position
Latitude :40
Longitude:120
2. Press SEL and use the SMALL and LARGE knobs to
set the grid position. The LAT and LON smart keys
activate selection of the Lat and Lon coordinates.
Coordinates are selected in 10º increments.
3. Press ENTER .
4-18
Moving Map Functions
ENTER
SEL
40 º
50 º
120 º 130 º
SAR Position
Reference Point
(i.e. Lat 40 and Lon 120)
One degree grid square