Garmin APOLLO GX65 User Manual

Page 237

Advertising
background image

Point D (Inbound to OED)
1. As you intercept the 162 inbound a course intercept

alert is given. Sequencing is automatically enabled.
Turn to intercept the desired course. At 3 nm
inbound to OED, the Approach Active annunciator
will begin flashing to indicate that approach RAIM
prediction is beginning. The transition to approach
active is starting.

2. At 2 nm inbound to OED, the CDI sensitivity will

begin changing from 1 nm to 0.3 nm full-scale
deflection.

3. As you cross OED, the Approach Active

annunciator will come on solid to indicate that
approach operation is active and you may continue
the approach to the MAP (MA14).

Point E (Between OED and MA14)
1. Continue to the missed approach point. Verify that

the OBS/HLD and Approach Active annunciators
are lighted steady.

2. If you wish to cancel Approach Active, press

OBS/HLD. Your Apollo GX will then revert to
Approach Transition with 1 nm CDI deflection
and a 1 nm RAIM alarm limit.

Point F (Choosing not to land at the MAP)
1. At the Missed Approach Point, if you are not going

to land, follow your missed approach clearance.
The MAP will remain active and your Apollo GX
will continue to provide guidance on the final
approach course until you press the

OBS/HLD

key.

The published missed approach instructions say
“climbing right turn to 6100’ direct OED VOR and
hold.” You will then press the

OBS/HLD

key as soon

as you decide to miss the approach.

2. The CDI will scale out to 1 nm and OED will

become the active waypoint. As you reach 6100’,
press

DIRECT-TO

and then press

ENTER

to establish

a direct route to the active waypoint (OED).

9-47

Approach Examples

OBS/HLD

WPT SEQ

OBS/HLD

WPT SEQ

ENTER

D

Advertising
This manual is related to the following products: