Emergency channel 10-8, Intercom function 10-8, Intercom 10-8 – Garmin APOLLO GX65 User Manual

Page 288: Squelch 10-8, Emergency channel -8, Intercom function -8

Advertising
background image

Weather Frequencies

(When available)

162.400 MHz
162.425 MHz
162.450 MHz
162.475 MHz
162.500 MHz
162.525 MHz
162.550 MHz

Note

You can search for the best local weather by
inserting a Weather frequency into the
Standby position, pressing

MON, and then

turning the

SMALL

knob to scroll through

the Weather channel choices.

Emergency Channel
The standard emergency channel (121.50 MHz) is
stored in the memory of the GX60/65.

1. In the Comm function, press

RCL

and then turn the

LARGE

knob to display the Emergency channel

memory.

2. Press the

FLIP/FLOP

key to load the Emergency

Channel into the Active frequency or press

ENTER

to load it into the Standby frequency.

Intercom

Function

When two headphone and microphone jacks are
connected to the GX60/65, these headsets can be used
as a voice-activated intercom.

When you select the Intercom function with the
installed selector switch, the intercom function is
enabled. The Volume control will control the
headphone listening level. The receive function will
automatically become active when a signal is detected.
Receiver audio volume will be reduced when the
intercom is selected.

The Intercom Squelch Sensitivity can be set in the
System Functions on page 10-10.

10-8

Comm Radio Operation

Advertising
This manual is related to the following products: