Garmin G1000 Socata TBM 850 - Manual (Page 116)

190-00709-00 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 4-10
AUDIO PANEL AND CNS
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the ENT Key (Figures 4-9, 4-10, and 4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1) From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the GCU 475 FMS
Knob or selecting the appropriate softkey.
2) Turn the FMS Knob to place the cursor on the desired COM frequency (Figure 4-11).
3) Press the ENT Key to load the COM frequency into the standby field of the selected COM radio.
4) Press the Frequency Transfer Key on either PFD to transfer the frequency to the COM Active Frequency
Field.
Figure 4-9 Frequency Auto-Tuning from the MFD
Press the ENT Key to Load a
Highlighted Frequency into the
COM Standby Frequency Box.
Turn the FMS
Knob to Scroll
Through a List
of Frequencies.