Flight management departure (dp) – Garmin G1000 Socata TBM 850 User Manual
Page 221
190-00709-00 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
5-69
FLIGHT MANAGEMENT
DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints,
and a runway.
Figure 5-63 Departure Loading Page - Selecting the Departure
Departure Airport
Selected
Departure
Departures Available at
KMCI
Departure Waypoint
Sequence
Preview of
Selected
Departure
Loading a departure procedure into a stored flight plan:
1)
Select a stored flight plan from the Flight Plan Catalog Page.
2)
Select the EDIT Softkey; or press the MENU Key, select ‘EDIT FLIGHT PLAN’, and press the ENT Key. The Stored
Flight Plan Page is displayed.
3)
Select the LD DP Softkey; or press the MENU Key, select “Load Departure”, and press the ENT Key. The
Departure Loading Page is displayed.
4)
Select a departure. Press the ENT Key.
5)
Select a transition for the selected departure. Press the ENT Key.
6)
Select a runway served by the selected departure, if required. Press the ENT Key.
7)
Press the ENT Key to load the selected departure procedure.