Garmin G1000 Socata TBM 850 - Manual (Page 59)

190-00709-00 Rev. A Garmin G1000 Pilot’s Guide for the Socata TBM 850 2-5
FLIGHT INSTRUMENTS
Vspeeds (V
R
, V
X
, V
Y
, and V
APP
,) can be changed and the Vspeed flags can be turned on/off from the Timer/
References Window. When active (on), the Vspeeds are displayed at their respective locations to the right of
the airspeed scale. By default, all Vspeed values are reset and all Vspeed flags are turned off when power is
cycled.
Changing Vspeeds and turning flags on/off:
1) Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a
default value, an asterisk appears next to the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.
Figure 2-5 Timer/References Window Figure 2-6 Timer/References Menu
Turning all Vspeed flags ON/OFF:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) To activate all Vspeed flags, press the ENT Key with ‘All References On’ highlighted.
4) To remove all Vspeed flags, turn the FMS Knob to highlight ‘All References Off’ and press the ENT Key.
Restoring all defaults:
1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight ‘Restore Defaults’ and press the ENT Key.