4 abnormal operations, Abnormal gps conditions, 4 abnormal operations -35 – Garmin G1000 Socata TBM 850 User Manual

Page 89

Advertising
background image

190-00709-00 Rev. A

Garmin G1000 Pilot’s Guide for the Socata TBM 850

2-35

FLIGHT INSTRUMENTS

2.4 ABNORMAL OPERATIONS

ABNORMAL GPS CONDITIONS

The annunciations listed in Table 2-4 can appear on the HSI when abnormal GPS conditions occur; see Figure

2-51 for examples. Refer to the Flight Management Section for more information on Dead Reckoning Mode.

Annunciation

Location

Description

LOI

Lower left of

aircraft symbol

Loss of Integrity Monitoring–GPS integrity is insufficient for the current
phase of flight

WARN

Lower left of

aircraft symbol

Warning–RAIM function detects excessive GPS position errors

INTEG OK

Lower left of

aircraft symbol

Integrity OK–GPS integrity has been restored to within normal limits
(annunciation displayed for 5 seconds)

DR

Upper right of

aircraft symbol

Dead Reckoning–System is using projected position rather than GPS position
to compute navigation data and sequence active flight plan waypoints

Table 2-4 Abnormal GPS Conditions Annunciated on HSI

Figure 2-51 Example of HSI Annunciations

Dead Reckoning Mode causes the CDI to be removed from the display (when GPS is the selected navigation

source) and the following items on the PFD to be shown in yellow:

• Current Track Bug

• Wind Data (calculated based on GPS information)

• Distances in the Bearing Information windows

• GPS bearing pointers

These items should be verified when operating in Dead Reckoning Mode.

Advertising