Flight management arrival (star) – Garmin G1000 Socata TBM 850 User Manual
Page 223
190-00709-00 Rev. A
Garmin G1000 Pilot’s Guide for the Socata TBM 850
5-71
FLIGHT MANAGEMENT
ARRIVAL (STAR)
A Standard Terminal Arrival (STAR) is loaded at the destination airport in the flight plan. Only one arrival
can be loaded at a time in a flight plan. The route is defined by selection of an arrival, the transition waypoints,
and a runway.
Figure 5-66 Arrival Loading Page - Selecting the Arrival
Destination Airport
Selected Arrival
Arrivals Available at KCOS
Arrival Waypoint Sequence
Preview of
Selected Arrival
Selected Runway
Loading an arrival procedure into a stored flight plan:
1)
Select a stored flight plan from the Flight Plan Catalog Page.
2)
Select the EDIT Softkey; or press the MENU Key, select ‘EDIT FLIGHT PLAN’, and press the ENT Key. The Stored
Flight Plan Page is displayed.
3)
Select the LD STAR Softkey; or press the MENU Key, select “Load Arrival”, and press the ENT Key. The Arrival
Loading Page is displayed.
4)
Select an arrival. Press the ENT Key.
5)
Select a transition for the selected arrival. Press the ENT Key.
6)
Select a runway served by the selected arrival, if required. Press the ENT Key.
7)
Press the ENT Key to load the selected arrival procedure.