Bosch GNA 3,5 Professional - Manual (Page 13)

English | 13
Bosch Power Tools 1 609 929 X90 | (16.2.11)
Product Description and
Specifications
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for cutting sheet metal
without deforming the material and is suitable
for straight cuts, cut-outs and narrow curves.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Fixing screw for extension
2 Handle extension
3 Auxiliary handle
4 Allen key
5 On/Off switch
6 Thread for auxiliary handle
7 Screw for punch fastener
8 Borehole at die holder
9 Screw for die
10 Punch
11 Guide plate
12 Hold down guide
13 Screw for hold down guide
14 Die
15 Die holder
16 Die adjustment screw
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 83 dB(A);
Sound power level 94 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
= 9 m/s 2 , Uncertain-
ty K < 1.5 m/s 2 .
Nibbler GNA 3,5
Professional
Article number 0 601 533 1..
Rated power input W 620
Output power W 340
Stroke rate at no
load n
0
min -1 1000
Stroke speed under
load
min -1 670
Max. steel sheet cut-
ting capacity*
mm 3.5
Cutting width mm 6
Smallest curve radius mm 70
Weight according to
EPTA-Procedure
01/2003
kg 3.5
Protection class / II
* to 400 N/mm 2 with reference to steel sheet
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-101-003.book Page 13 Wednesday, February 16, 2011 12:22 PM