Registration status – AASTRA AMC+ User guide for Android EN User Manual
Page 16
AMC+ 2.0 User Guide
7 General Operation
7.2 Registration Status
This registration icon indicates that there is a VoIP-capable data connection. This data con-
nection may be Wi-Fi or Packet Data (refer to
for information about Packet Data set-
tings).
This icon indicates a successfully established data connection. Features can usually be ac-
cessed perceivably faster. A SIP-connection is used for feedback and feature access. Please
note that this connection produces traffic.
This icon indicates that a system registration is in progress.
The red icon appears if the system registration has failed. This may be caused by faulty user
credentials, (refer to
). Please contact support if this problem persists.
You will see this icon if there is currently no data connection available, and therefore no
system registration possible. Whenever a configured Access Point becomes available, the
AMC+ can re-registers itself in the system if it is configured to do so. Please note that
system registration (data access) is needed for fast mode call setup method.
Registrations in Data Networks other than Wi-Fi
Please note that certain settings have to be enabled for the AMC+ to register over Packet
Data (refer to
) . Even if these settings are set to allow Packet Data, in order to save
battery a connection/system registration will only be held as long as there is user interac-
tion. The connection will be terminated (and along with this the AMC+ will de-register
itself) when there is no interaction. If this happens, there will be no re-connection and re-
registration until there is user interaction (Corporate Phonebook search etc.) that requires a
re-connection, or if there is an incoming call.
Static Roaming
When the AMC+ is turned off, calls will only be routed to the GSM Number of a user if
Static Roaming
is activated for this user. If Static Roaming is deactivated on the AMCC, the
AMC+ will not be available in cellular-only networks.
16