AASTRA AMC+ User guide for Android EN - Manual (Page 26)

AMC+ 2.0 User Guide 10 Settings
10 Settings
There are a couple of mandatory settings that have to be configured to be able to use all of your AMC+’s
features. All settings, mandatory and optional, are explained in this chapter.
Configuration Loss with Firmware Updates
With a firmware update, the AMC+ application will not be deleted. However, the configu-
ration of your AMC+ will be lost and must be reloaded. To download the configuration data
manually, open the Settings section on your AMC+, then open the context-sensitive menu,
and select the option Configuration Download.
If the Hide settings checkbox has been set by the Admin in the AMC Portal, some of them
might not be visible to the user.
Never change preconfigured Settings!
Every number has to be configured on the AMCC, and will hence in most cases be precon-
figured on the AMC+. If one of them does not work properly, ask your administrator to
check if the according feature has been activated for your User Account on the AMCC. If
your AMC+ has been preconfigured, simply skip the Configuration chapter. However, you
may want to consult it, to fully understand how your AMC+ works. The AMC+ downloads
the configuration from the Aastra portal.
10.1 FMC Numbers
In order to take advantage of the available AMC Solution features the AMC+ and the AMCC "com-
municate" via special numbers which must be configured on the AMCC to trigger a certain behavior in
cellular networks.
10.1.1 PBX Dialing-in Number
The PBX Dialing-in Number is used for cellular calls. It is used by the AMC+ to route the calls through
your company network (AMCC). It makes extension dialing from the AMC+ possible i.e. (calling
colleagues via their extensions numbers and not their full numbers). It also ensures that your corporate
phone number is displayed to the called party and not the number of your currently used SIM card.
AMCC-Side
This number has to be configured for the PBX Dialing-in purpose on the AMCC!
E.164 Format
The PBX Dialing-in Number has to be configured in E.164 format to ensure that the AMC+
is always able to dial it independently from its location.
26