AASTRA AMC+ User guide for Android EN - Manual (Page 34)

AMC+ 2.0 User Guide 10 Settings
10.6.13 Buffer (ms) and Server Recommended Handover
These settings should not be altered. The factory default values of the AMC+ are normally apt to a
variety of network configurations. There should hence be no need for modification.
10.6.14 Energy Saving
If Energy Saving is activated, the processor performance will be lowered as soon as the phone is in
stand-by. This can perceivably prolong the battery life of your smartphone. This setting is enabled by
default.
10.6.15 Log Level
This setting should only be used by administrators for testing and/or trouble shooting. Using these
options is only suitable for advanced administrators, please go to section
13 .
Terminal
View live logs with the setting Terminal and the ddms.exe (which is part of the Android SDK). Turn
the Terminal logging on, connect your phone to the computer with the appropriate SDK version and
run the ddms.exe. Once you click on the hardware device in the ddms-viewer, you will see all live
log messages.
File
Set the Log Level to File to have the AMC+ write logs into a file called AMCClientLog.txt in the
AMC+ folder on the SD card of your phone.
10.7 Licensing
This contains the IMEI, expiry date and license key for your AMC+.
The option "Server-based Licensing" enables the automatic retrieval of the license key from the AMCC.
The user then does not have to enter the key manually.
10.8 About Application
If asked for the version of your AMC+ for Android, for support reasons or others, the About Application
section will give you all relevant details.
34